Chapter 11 · The Editor

Find and Replace

Find and replace is the tool you reach for when a name changed in chapter nine, when you suspect you have written "suddenly" forty times, or when you need to get back to that one line about the harbour. Storskarvia's version lives in a single bar, works on the document you have open, and is careful about one thing in particular: it will not quietly replace something other than the match you are looking at.

Opening the bar

Two ways in:

  • The Find button at the right-hand end of the Home, Review and View ribbons, in every format. The format's own tab (Insert, Script, Elements or Timing) has none, so switch to one of the other three.
  • ⌘F, or Ctrl+F on Windows and Linux, from anywhere on the page.

The keystroke opens Storskarvia's bar, and your browser's own find stays shut. Storskarvia's bar searches the document: it counts, selects each match in the manuscript, and can replace. Pressing ⌘F again while the bar is already open selects whatever is in the search box, so you can type straight over your last search without reaching for the mouse.

What is on the bar

The bar appears above the manuscript, and reads left to right in the order you use it:

ControlWhat it does
Find…The text you are looking for. Searching starts as you type; there is no button to press first.
AaMatch case. Off by default, so harbour finds Harbour. Ticking it re-runs the search immediately. It governs case and nothing else: quotes and dashes are matched the same way with it on or off.
The counterReads 3/17 for the third of seventeen matches. With a query and nothing to show for it, it reads no matches. Empty the search box and it goes blank.
↑ and ↓Previous and next match.
Replace with…The replacement text. Leave it empty to delete the match outright.
ReplaceChanges the one match currently highlighted.
AllChanges every match in the document.
✕Closes the bar, clears the highlighting, and puts your cursor back in the manuscript.

Every match is highlighted in the manuscript at once. The one you are on is picked out in the accent colour, the rest in the softer marker shade, so you can see how thickly a word is scattered through a chapter before you decide to do anything about it.

What counts as a match

Storskarvia searches for the literal text you typed. There are no regular expressions, no wildcards, and no whole-word toggle, so searching for art also finds it inside heart and started. Adding a space on one or both sides is the usual way round that:  art  finds the word and skips the rest.

The manuscript turns what you type into proper typography as you go: an apostrophe becomes a curly one, quotation marks curl, and imported files often bring non-breaking spaces with them. The search box does none of that, so find matches the plain forms against the typeset ones for you:

You typeIt also finds
'Curly single quotes and apostrophes, and the prime mark
"Curly double quotes, low quotes, and the double prime
-En dashes, em dashes, the minus sign and the other hyphen variants
A spaceNon-breaking and thin spaces

So I'm finds every I’m in the book. The one exception is the ellipsis. Three dots typed in the manuscript become a single … character, and three typed dots in the search box will not find it. Copy an ellipsis out of the manuscript and paste it into the box.

The Replace with… box works the other way: it puts in exactly the characters you typed, with no typography applied. Replace Im with I'm and you get a straight apostrophe. If that matters to you, copy a curly one from the manuscript into the replacement.

What Storskarvia searches is the text a reader sees. Footnote markers and other inserted objects contribute no characters of their own, and their positions are accounted for, so a match found after one lands exactly on the words you were expecting.

A match cannot cross a paragraph. Searching is done block by block, so a phrase that runs from the end of one paragraph into the start of the next will not be found as a single match. In a screenplay the same applies across elements: a phrase split between a character cue and the dialogue underneath it is two blocks, and find sees two blocks.

Moving between matches

Enter in the search box goes to the next match, ⇧Enter to the previous one. The ↑ and ↓ buttons do the same. Both wrap: past the last match you arrive back at the first, and the counter tells you it has happened by resetting to 1/17.

Each step selects the match in the manuscript and scrolls it into view, which means you can walk the whole document from the search box and start typing over any match you land on.

Esc closes the bar while your focus is still on it, from the replace box and the buttons as well as from the search box. Once you have clicked back into the manuscript, that key belongs to the manuscript instead: it moves your focus out to the ribbon, and the find bar stays open. Close it with ✕, or click back onto the bar and press Esc there. Chapter 10 has the full order in which Esc is claimed.

Replacing

Replace changes the match currently highlighted and nothing else. The search re-runs straight afterwards, the count drops by one, and pressing Replace again takes the next one. Slower than All, and the honest option when some instances should change and some should not.

All replaces every match in the document in one go, then reports what it did in place of the counter: replaced 12. Two things follow from that, and both surprise people the first time:

  • The search is cleared afterwards. The highlighting goes with it. Type in the search box again to start a fresh search; nothing is broken.
  • It is a single undo. With suggestion mode off, one ⌘Z puts all twelve back. If you replaced the wrong thing across ninety pages, that is the keystroke, and it is worth pressing before you do anything else. With suggestion mode on, the twelve arrive as twelve separate suggestions; the next section covers taking those back.

An empty replacement field is allowed and means what it looks like: All with nothing in the right-hand box deletes every match. Storskarvia does not ask you to confirm, so read the counter before you press it.

Suggestion mode, and reviewers

With suggestion mode on, a replacement is proposed and left for the owner to decide. The old text stays on screen struck through, the new text arrives beside it as an insertion, and the owner accepts or rejects it from the Changes tab in the rail like any other suggestion.

Three consequences worth knowing while you are working that way. Search still finds struck text, because it is still on the page and you should be able to search what you can read, so the counter does not drop after a Replace. Replace itself steps over the runs it has already marked: pressing it repeatedly moves forward through the document and never lands on the same sentence twice. And to undo a suggested All, reject the suggestions on the Changes tab. Reject all there rejects every tracked change in the document, other people's included, so reject them one at a time if anything else is pending.

If you are on a document as a reviewer, Replace and All are disabled and carry the tooltip "Reviewers suggest and comment. The owner formats and restructures." Searching, counting and stepping through matches all work normally. Chapter 47 covers the roles and what each one may do.

Renaming a character

For a character's name in a screenplay, find and replace is the wrong tool and there is a right one. The Script tab has Rename Character, which opens a Rename character dialog with a dropdown of the names already in your script and a New name field, then Rename or Cancel. The Script tab, and so the button, exists only on screenplays. It renames the character cues, uppercasing the new name as a cue requires, and it keeps any extension in brackets, so MARGOT (V.O.) becomes ROSA (V.O.) with the (V.O.) intact.

The checkbox Also update mentions in action & dialogue extends the change to the action, dialogue and parenthetical lines, matching whole words in any case and setting the new name in title case. The status bar reports the total, in the form Renamed in 34 places. If the script has no character cues yet, the button answers No characters in the script yet. and opens no dialog. A blank New name changes nothing.

Find and replace would have caught Margot inside Margotte and shouted the name in the middle of a line of action. Use the dialog.

What find will not do

  • It does not search your project. One document at a time. Open the other chapter and search there.
  • It does not search comments, findings, or the Story Bible. The bar reads the manuscript. The rail has its own tabs, and Chapter 9 describes them.
  • It does not find formatting. There is no way to search for every italic phrase or every scene heading. The navigator down the left-hand side is the tool for moving by structure. It hides when the window is narrower than 1100 pixels, so widen the window if you cannot see it.
  • Case-insensitive matching has one gap. A character whose lowercase form is a different length, the Turkish dotted capital İ, is left alone so that every match keeps its correct position. Tick Aa and search for the exact form.

None of this touches the AI staff. Find and replace changes the text you tell it to change, where you tell it to, and nowhere else.

Updated 2026-10-19 · Full contents · Something wrong or missing?

Start writing free